1.Raw Material Preparation: The primary raw material for plywood is wood, typically selected from poplar, eucalyptus, pine, and so on. Raw materials undergo rigorous selection to ensure wood quality, with priority given to natural solid wood such as all-eucalyptus or all-poplar. These woods inherently contain extremely low formaldehyde levels, laying the foundation for producing environmentally friendly panels.
Best quality,hummingbird keeping
Categories
Contact Us
E-mail:
salesmanager@h-birdmachinery.com
Phone/WhatsApp:
Address:
Linyi Feixian, Linyi City, Shandong Province
High-end furniture plywood production line
Produces smooth, flat plywood suitable for veneering, painting, laminating, or direct use in visible furniture parts.
- Description
- Service process
- Why choose us
- FAQ
-
The manufacturing process for furniture plywood generally follows these steps:
2. Rotary Cutting and Drying: After being cut to length and debarked, logs enter the veneer peeling machine, where they are sliced into thin veneers approximately 3mm thick. These veneers must be promptly dried to ensure their moisture content meets production requirements. Automated drying technology is typically employed to maintain veneer moisture below 16%, preventing warping and delamination of the finished plywoods.
3.Panel Assembly and Glue Application: After drying, veneer are assembled into full-size panels and undergo glue application. Many manufacturers now utilize MDI eco-friendly adhesives, which contain no added formaldehyde and significantly reduce formaldehyde levels within the plywoods.
4.Panel Assembly and Cold Pressing: The glued veneers are stacked in a crosswise pattern to form a panel blank. This is followed by cold pressing to achieve basic bonding between the veneers, preventing misalignment during handling.
5. Hot Pressing and Cooling: After cold pressing, the board blanks enter the hot press, where high temperature and pressure cure the adhesive. The pressed boards must be left to cool for a period to ensure structural stability.
6. Trimming and Inspection: After cooling, the panels undergo edge trimming, dust removal, and sanding to ensure a smooth, flat surface. Finished panels then undergo rigorous quality inspection, including measurements of thickness, width, moisture content, and other specifications, to guarantee each panel meets environmental and quality standards.
10 Layers Hot Press Machine Parameters
Model BY214*8/8-10IId Nominal pressure 8000 KN Feeding way Horizontal Number of layers 10 layers Space of layers 100㎜ Number of hot press plates 11PCS Size of hot press plates 1370*2700*52㎜ Diameter and numbers of cylinders Φ260㎜*6PCS Working stroke 1000㎜ Tolerable pressure ≤25 Mpa No-load closing time About 25S Low pressure pump motor 355cc Power 22KW High pressure pump motor 25cc Power 7.5KW Total weight About 40Tons Overall size 3550*1370*4500㎜ Control mode Automatic pumping station Frame Double frame, overall frame Top and bottom beam 900,900㎜ Middle beam 400㎜ Features
1. High Surface Quality
Produces smooth, flat plywood suitable for veneering, painting, laminating, or direct use in visible furniture parts.
Compatible with faced veneers (e.g. teak, oak, walnut) or laminates (e.g. melamine, PVC foil).2. Precision in Thickness & Size
CNC-controlled presses and saws ensure consistent panel thickness and square edges.
Typical tolerances: ±0.1–0.2 mm.3. Fine Core Veneer Assembly
Uses high-grade core veneer (often poplar, eucalyptus, birch) with minimal knots and defects.
Uniform layering ensures good bonding and strength with minimal warping.
4. Strong & Even Bonding
Utilizes urea-formaldehyde or melamine urea-formaldehyde glues for internal applications.
High-pressure hot press ensures even bonding across the entire sheet.
5. Efficient Workflow Integration
Full automation from veneer preparation → gluing → hot pressing → sanding → cutting → grading.
Integrated conveyor systems reduce labor and improve safety.
6. Sanding for Finishing
Includes wide-belt sanding machines to ensure smooth surface finish, ready for laminating or painting.
Optional double-sided sanding stations.
7. Multi-Format Flexibility
Supports various panel sizes: 4x8 ft (1220x2440 mm), 3x6 ft (915x1830 mm), etc.
Thickness range: 3mm to 25mm depending on layer count and application.
8. Optional Face Veneer Lamination
Allows for application of decorative veneers (teak, oak, etc.) using glue-spreaders and pressing stations.
May include UV coating or cold-press line for lamination.
Application
Furniture plywood is commonly used in:
Cabinet carcasses
Wardrobe and kitchen furniture
Drawer bottoms and back panels
Office partitions
Decorative wall panels
Table tops, bed panels, shelving
-
Pre-sale service
1.Provide the free consultation of equipment
2.Provide the standard device and the flow chart
3.According to the clients' special requirement ,offering the resonable plan and free design to help to select the equipment .
4.Welcome to visit our factory
Service during the sales
1. Inspect the machine before leaving the factory
2.Oversea install and debug the equipment
3. Train the first-line operator
After sales service
1. 24 hours online service
2. Provide the VIDEO with install and debug the equipment
3. Provide technical exchanging -
1.lasering your logo on products and designing logo is free
2.Delivery time within 30days
3.No else charge
4.MOQ≥1
5.Provide products quotation
6.Provide Packaging customization service
7.SupportWechat/Email/whatsapp/
8.We specializein this field for 25 years
9.Excellent after-sale system
10.Supporting visits to factory -
1.Q: Factory or distributor?
A: We are A manufacturer of wood-based panel machinery. Our products are manufactured by our own manufacturers and technical experts.
2. Q: Quality control?
A: Each machine is tested three times before delivery.
3. Q: Lead time?
A: 30-40 days after receiving the deposit.
4. Q: Factory layout design?
A: We have A team of engineers making floor plans for customers for free.
5. Q: After-sales service?
A: We have technicians to help customers with the installation.
6. Q: Warranty?
It's a one-year warranty, and we always provide parts and service.
7. Q: Terms of payment?
T/T or L/C will do.
8. Q: behind MOQ?
A: The moQ is 1 set.
Hot Tags:
Wood industry machinery production line
Inquire Now
Note: Please leave your email address, our professionals will contact you as soon as possible!
